May 19, 2025 Leave a message

What Are The Basic Structural Components Of A Forklift And What Are The Main Forklift Accessories?


There are many types of forklifts, but their basic structures are similar, mainly composed of power unit, chassis, body, lifting mechanism, hydraulic system and electrical equipment. These major systems cooperate with each other, and thousands of forklift parts form a complete operating system.
 

{"type":"load_by_key","id":"","key":"banner_image_0","width":0,"height":0,"image_type":"search","pages_id":"6136469511734274","genre":"技术文章","artifact_key":6138030048708098}
 


​​​​​​​Basic structure and function of forklifts
 

Power unit

The power unit is the core of the forklift, providing power for vehicle operation and cargo lifting. Internal combustion forklifts use engines as power sources, including gasoline engines, diesel engines, liquid petroleum gas (natural gas) engines and dual-fuel engines. The engine converts the chemical energy of the fuel into mechanical energy, outputs power through the flywheel, drives the forklift to travel and the working device to operate.


Chassis

The chassis is used to support the forklift body, transmit engine power and ensure the normal driving of the vehicle. It includes transmission device, driving device, steering device and braking device:

Transmission device: responsible for transmitting engine power to the drive wheel, composed of clutch, gearbox, drive shaft and other components, to achieve vehicle forward, backward and speed change. ​
Traveling device: The front axle is a drive axle, which increases the axle load when carrying to improve ground adhesion; the rear axle is a steering axle, which cooperates with the suspension device to reduce driving bumps. ​
Steering device: divided into mechanical steering system and power steering system according to the power source. Mechanical steering relies on the driver's manual operation, while power steering relies on the engine power to assist. Internal combustion forklifts mostly use power steering, such as an integral power steering gear, to reduce the driver's operating burden. ​
Braking device: It consists of a foot brake (service brake) and a hand brake (parking brake). Some forklifts are equipped with an ABS anti-lock braking system to improve braking safety.
 

Body​

The body and frame of the forklift are an integrated structure, welded with steel sections. A counterweight is installed at the rear of the forklift. The material is usually cast iron. The weight of the counterweight is set according to the rated lifting capacity of the forklift to balance the weight of the cargo and ensure the stability of the forklift during operation. ​
 

Lifting mechanism​

The lifting mechanism consists of a mast and a fork, and is a key part of the forklift to complete cargo loading and unloading. The mast is hinged to the front axle support body and consists of a steel frame and a sliding bracket. The fork is installed on the sliding bracket to carry materials. The fork specifications are designed according to the maximum load of the forklift, and can be tilted forward and backward through a hydraulic cylinder.​
 

Hydraulic system​

The hydraulic system is the power source for the forklift to achieve cargo lifting and mast tilting, mainly including:​
Lifting hydraulic cylinder: The top of the plunger is fixed to the lifting mast to control the lifting of the fork.​
Tilt hydraulic cylinder: The top of the plunger is hinged to the mast to achieve the mast tilting forward or backward.​
Hydraulic pump: Commonly used as a vane pump or gear pump, it outputs 6.37-15.7MPa high-pressure oil to drive the lifting and tilting hydraulic cylinders.​
Hydraulic distribution valve: It consists of a valve body, a lifting hydraulic cylinder valve core, a tilting hydraulic cylinder valve core and a safety valve. The valve core is controlled by the operating handle to deliver high-pressure oil to the corresponding hydraulic cylinder. The safety valve returns the oil to the tank when the system oil pressure is too high.​
Throttle valve: Installed in the lifting hydraulic cylinder pipeline to increase the oil flow resistance and ensure the smooth descent of the fork.​


Electrical equipment​

Electrical equipment consists of power supply, engine starting system, ignition system, and lighting, signal and other electrical equipment. The power supply provides power to the electrical components of the forklift, the starting system is used to start the engine, the ignition system plays a role in the ignition process of the internal combustion engine, and the lighting and signal equipment ensure the safety of the forklift operation. ​


Main categories of forklift accessories ​


Forklifts are mainly composed of four major systems: power unit, chassis, working device and electrical equipment. Each system contains many accessories:


Power unit accessories ​

Internal combustion counterbalanced forklift power unit accessories include: ​
Engine overhaul parts: piston, piston ring, connecting rod bearing, crankshaft bearing, thrust washer, cylinder liner, etc. ​
Valve system parts: intake valve, exhaust valve, valve seat ring, valve guide, valve spring, etc. ​
Fuel system parts: fuel nozzle, oil pump core, diesel filter, oil filter, engine oil, air filter, diesel high-pressure pump, etc. ​
Other parts: belt, spark plug, starter, battery, generator, flywheel, water pump, carburetor, etc.​
 

Transmission drive device accessories​

The device accessories include:​
Brake system: brake master cylinder, brake slave cylinder, brake assembly, brake shoe, handbrake cable, etc. ​
Transmission parts: clutch master cylinder, clutch slave cylinder, clutch pressure plate, clutch plate, release bearing, etc. ​
Steering and hydraulic parts: steering wheel, steering gear assembly, steering gear repair kit, hydraulic pump assembly, hydraulic pump repair kit, etc. ​Axles and wheels: front wheel hub/drive wheel hub, front wheel steel rim, rear wheel drum (steering wheel hub), rear wheel steel rim, etc. ​

 

Manipulation control device accessories​

The main accessories are:​
Operation lever parts: steering wheel, various joysticks (hydraulic lifting, tilting, side shifting, etc.). ​
Transmission and control parts: forward gear, reverse gear, first shaft, second shaft, gearbox drive shaft spline, gearbox universal joint, etc.​
Control components: gear cable, gear ball head, gear switch, friction plate/copper plate, spacer/steel plate, etc. ​

 

Working device accessories ​

Working device accessories are divided into mechanical parts and accessories: ​
Mechanical parts: gantry bearings, gantry bearings, gantry chains, gantry side rollers, gantry sprockets, etc. ​
Accessories: forks, clamps, paper roll clamps, string rods, rotating frames, steel claws, buckets, etc., as well as various special-purpose accessories such as container spreaders, tipping buckets, etc. ​
 

Electrical equipment accessories ​

Including forklift batteries, various lighting fixtures (bulbs, headlight assemblies), warning and alarm devices (warning lights), control components (computer boards, modules, contactors) and various sensors (direction sensors, angle sensors, height sensors, speed sensors), etc. ​
By understanding the structural composition and accessories of forklifts, we can better understand the working principle of forklifts and provide basic support for the use, maintenance and repair of forklifts. All systems and accessories work together to ensure that the forklift completes material handling tasks efficiently and safely in the logistics and industrial fields.

 

Professional forklift parts manufacturer

Cooperating with lemo, you can get full system accessories support. It is compatible with forklifts of multiple brands and has strict quality control. It helps enterprises reduce equipment maintenance costs and improve forklift operation efficiency and safety.

Phone Number

+86-551-65862235/+8615255465858

E-mail

info@lemoparts.com

banner2

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry