Jul 13, 2024 Leave a message

Why Is The Electric Pallet Truck's Operating Handle Not Sensitive And Sluggish in Response?

The insensitivity and slow response of the electric pallet truck operating handle may be caused by the following reasons:

 

 1.Connection line failure

 The connection line between the operating handle and the vehicle control system may be loose, damaged or in poor contact. This will cause poor signal transmission, making the handle sluggish.
Vibration after long-term use may cause the line plug to loosen, or the line outer skin to wear and cause the internal wires to short-circuit.


2. Handle sensor failure:

The sensor inside the handle is responsible for sensing the operating action and converting it into an electrical signal. If the sensor is damaged or aged, it may not be able to accurately sense the operation, resulting in a sluggish response.
The sensitive element of the sensor may fail due to long-term use or external impact.


3. Control system problem:

If the vehicle's control system fails, such as a damaged control module, program error or improper parameter setting, it may not be able to process the signal from the handle in time, resulting in a slow response.
The chip of the control module may fail due to overheating or unstable voltage.


4. Unstable power supply:

Low battery power, battery aging or charging system failure, resulting in unstable power supply voltage, may affect the normal operation of the handle.
After the battery ages, the output voltage may drop sharply when the load is large, affecting the response of the handle.


5. Mechanical parts stuck: The mechanical parts of the operating handle, such as buttons and rockers, may get stuck due to dust, debris or insufficient lubrication, affecting the flexibility of operation.
If the handle is not cleaned for a long time, dust and oil may accumulate around the moving parts, increasing friction resistance.

 

Choose our products and you will never have this trouble again!

Contact now

LM-C4 Heavy Duty Hand Pallet Forklift With 4000kgs Max Capacity
LM-CL35 Manual Pallet Forklift With 35mm Min Fork Height

Send Inquiry

whatsapp

Phone

E-mail

Inquiry