Dec 10, 2022 Leave a message

The Working Principle Of The Aerial Work Platform

The hydraulic oil is formed by the vane pump to form a certain pressure, through the oil filter, flameproof electromagnetic directional valve, throttle valve, hydraulic control check valve, balance valve into the lower end of the cylinder, so that the piston of the cylinder moves upward, lifting the weight, the upper end of the cylinder returns oil back to the oil tank through the flameproof electromagnetic directional valve, its rated pressure is adjusted through the relief valve, and the reading value of the pressure gauge is observed through the pressure gauge.

The piston of the cylinder moves downwards (i.e. the weight falls). The hydraulic oil enters the upper end of the cylinder through the explosion-proof electromagnetic directional valve, and the oil return at the lower end of the cylinder returns to the oil tank through the balance valve, hydraulic control check valve, throttle valve and flameproof electromagnetic directional valve. In order to make the heavy object fall smoothly and the brake safe and reliable, a balance valve is set on the return oil circuit to balance the circuit and maintain the pressure, so that the falling speed is not changed by the heavy object, and the flow rate is adjusted by the throttle valve to control the lifting speed. In order to make the brake safe and reliable and prevent accidents, the hydraulic control check valve, that is, the hydraulic lock, is added to ensure that the hydraulic pipeline can be safely self-locked when it accidentally bursts. An overload voice-activated alarm is installed to distinguish between overload and equipment failure.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry