As an important forklift accessory, the steering system will inevitably have some failures in daily use, and it is undoubtedly a very troublesome thing to go to the maintenance station every time there is a failure. Therefore, it is important to pay attention to self-inspection in daily use. Let's take a look at the common failure analysis of the forklift accessories steering system:
First, forklift steering system composition: forklift steering system is composed of steering device, steering axle, etc
Second, forklift steering device: composed of steering wheel, upper end shaft assembly, universal joint, lower end shaft assembly, bearing, shaft adapter, lower end steering tube, vehicle direction, priority valve, clamping handle, hydraulic switch, etc., according to the needs of the steering wheel inclination angle front and rear respectively.
Third, the steering axle: using transverse cylinder steering system, the steering is easier, more convenient and reliable.
Fourth, the common fault inspection and elimination methods of the steering system:
1. Oil leakage
Inspection: The steering cylinder seal is damaged or the line is subsequently damaged. Exclude: Replace
Inspection: The seal ring at the hub bearing or support bearing is damaged. Exclude: Replace the seal
5. The steering angle of the left and right drive wheels (front wheels) does not match
Check: The controller parameters are incorrect. Exclude: Adjust
2. The steering operation is laborious
Check: The diverter valve pressure is too low. Exclude: Adjust pressure
Check: There is air in the oil circuit. Exclude: Excludes air
Check: Steering gear return failure, positioning spring fragment or insufficient elasticity. Exclude: Replace the spring plate
Check: The leakage in the steering cylinder is too large. Exclude: Check the piston seal
3. Abnormal noise of the steering system
Check: The hydraulic oil level is too low. Excluded: Fill with hydraulic oil
Check: The steering gear rack is damaged. Exclude: Replace
Inspection: The supporting shaft is damaged. Exclude: Replace
Check: Insufficient lubrication. Excluded: Add lubricating grease
Check: The suction pipe or oil filter is blocked. Exclude: Clean or replace
4. The steering wheel does not move:
Check: The oil pump is damaged or malfunctioning. Exclude: Replace
Check: Priority valve is blocked or damaged. Exclude: Clean or replace
Inspection: Hoses or fittings are damaged or pipes are blocked. Exclude: Replace or clean



